The Sagem Fingerprint reader is an optional system that Traka implements to identify a user before allowing access to a system. With the correct operating system version and application version installed, to activate the Sagem MorphoSmart Fingerprint Reader you simply need to plug the reader in. There are no specific reader configuration options that need to be set for the reader to work – it’s simply plug & play.
Hardware Requirements
Sagem Reader Models
The following Sagem MorphoSmart Fingerprint Reader models are currently supported.
MSO CBM 4MB IDENTLITE – 3000 user capacity (up to 2 fingers each) (Sagem Part no:252711976)
Other variants have not been tested.
Traka Touch Operating System
For the Sagem MorphoSmart Fingerprint Reader to work with Traka Touch, the Traka Touch system must have Windows CE build version 1.9 or later installed.
NOTE: If a Traka Touch Base Board or Process Module has to be swapped for any reason, replacements might not have Windows CE version 1.9 installed as default and so please specify Windows CE version 1.9 or later when raising an RMA request!
If you connect a Sagem MorphoSmart Fingerprint Reader to a version of Windows CE less than 1.9, when you plug the reader in you get a Windows CE dialogue pop up requesting the Driver Name.
Traka Touch Application
For the Sagem MorphoSmart Fingerprint Reader to work with Traka Touch, the Traka Touch system must have Traka Touch Application version 01.02.4256.41 (07-Sep-12) or later installed.